Roll-A-Rack, a patented product, is a very easy to use, extremely efficient, American made product. The following instructions are the best way to get the most benefit from your Roll-A-Rack in terms of tight racks and reducing normal wear and tear areas caused by standard triangle friction.
Place the One Ball up to and including the nine ball in the rack. You will notice that there are two ends, each with a different profile. The head end is the more pointed of the two ends. Place the one ball at the head of the rack and set all other balls around it. Be sure to put the nine ball in the middle of all the balls.
The back of the rack does not touch the balls, allowing the racker the ability to put fingers from both hands between the balls and the back of the rack. Use the fingers from both hands to push the back row of balls and the rack at the same time. Use a back and forth motion to get your rack as tight as possible. With a little practice you'll se the balls practically rack themselves.
When you have your rack where you want it, roll the rack forward a little. Then lift the rack over the balls. When done correctly, the 9 Ball Roll-A-Rack clears the racked set of balls without disturbing them. This ability to efficiently maneuver the balls and the 9 Ball Roll-A-Rack together puts the racker in control of the racking process.
When racking the balls use as little top pressure as possible, rolling the rack from the sides and back, rather than putting pressure on top will insure that the bearings roll freely over the cloth to reduce wear.
Your 9 Ball Roll-A-Rack will rack balls tighter and more efficiently than Any other nine ball rack on the market. The condition of your pool balls is also very important in obtaining a tight rack. Some sets of balls are rounder than others. For example and old set of balls that have been used for several years will not be as round and uniform as a new set off the dealers shelf. This means the old balls will not rack as tightly as a high quality new set. See your favorite billiards products dealer for more information on balls.
Experiment with your 9 Ball Roll-A-Rack. When used according to these instructions, your 9 Ball Roll-A-Rack will give you many years of tight, efficient, cloth saving racks.
Helpful Hint: When using your 9 Ball Roll-A-Rack, use as little top pressure as possible. Using excessive top pressure may leave bearing lines. Should you notice bearing lines, simply use less pressure. If bearing lines show up, a damp, luke warm towel or felt cleaner wiped over the area should eliminate lines with early detection. Brush cloth
The Roll-A-Rack company hopes you are very happy with you 9 Ball Roll-A-Rack. Be sure to check out the 15 Ball Roll-A-Rack for other pool games.
We welcome your comments and suggestions.